A stronger jaw, in minutes.

A soft silicone jawline enhancer with a built-in beard. No surgery, no downtime, no one can tell.

The KINE Jawline Set
€229 incl. VAT
Chin module + two jaw wings · S / M / L
S / M / L
No fitting appointment
30-day
fit guarantee
Skin-safe
tape included
What's in the set
Chin module, two jaw wings, tape strips and bottle
Jaw wings · L / R
Chin module
Breathable inner shell
Skin-safe tape
How to equip
RESERVE YOURS →
Wiping the jaw clean with a cloth
01
Prepare & position. Clean and dry your skin. Position the chin and jaw modules to check fit.
Applying tape inside each piece
02
Apply. Secure each module with the included skin-safe tape. Press for 30 seconds.
All three modules in place
03
Final result. All three modules in place. A natural, stronger jawline and chin — instantly.
Before / after
Same face. Sharper lines.
Before: three-quarter profile without the enhancer
Before
After: same pose wearing KINE
With KINE
Moves with you
Soft medical-grade silicone flexes when you talk and eat.
Edges disappear
The integrated beard conceals every line.
On in minutes
Off in seconds. Washes at home, reusable for months.
How it's built

Soft where you move. Hidden where it holds.

+2–7 mm
chin projection, 2 options
+4–8 mm
jaw width, per side
< 20 g
all three pieces
12 h
comfortable wear
Exploded view of the five layers
01
Five layers
Beard hair, a 0.5 mm outer skin, a soft gel core, a perforated underside and a thin flange that takes the tape.
Placement of the chin and jaw-angle modules
02
Placed inside your beard line
Every edge sits at least 10 mm inside your natural beard line. The chin piece stops 5–8 mm below the lip.
Tape zones on the face
03
Held where you don't move
Firmer tape under the jaw carries the weight. Gentle silicone tape holds the upper edges. Nothing is attached over the chewing muscle.
Cross-section of a module on skin
04
Hollow underneath
A firmer skin over a very soft gel, relieved underneath so your face moves freely below it.
Hair density and angle
05
Hair that hides the edge
Set at 45–60°, outward and downward like real growth. Full density at the edge, overhanging the flange by at least 8 mm.
Sizes

Two measurements. One fit.

Take the size quiz →
SizeJaw widthChin–lower lip
S92–102 mm38–44 mm
M100–110 mm42–48 mm
L108–118 mm46–52 mm
Between two sizes? Take the quiz.
You’ll shave a narrow strip under your jaw where the tape sits; your beard covers it.
How to measure
  1. 01Jaw width
    Hold a ruler flat under your jaw, from one jaw angle to the other. This measurement sets your size, so take it twice.
  2. 02Chin to lower lip
    From the bottom of your chin up to the lower edge of your lower lip, mouth closed and relaxed.
Chin projection
Look at your profile with your mouth closed and compare your chin to your lower lip.
Dashed line = the front of your lower lip. Orange outline = the added projection.
Hair colour
Pick the colour closest to your own beard.
Your beard should be at least 8 mm long. Trim it to match the piece for the most natural blend.
Order

Reserve yours.

The Jawline Enhancer isn’t on sale yet. Pre-order now, or join the waitlist and we’ll email you when it’s ready. Expected to ship summer 2027.

02 · Chin projection
03 · Hair colour
Free colour match →
Care

Gentle off. Fully dry.

01Take it off
  • Brush remover under the edge and wait until it lifts by itself. Never pull it off dry.
  • Use the included remover or isopropyl alcohol; never acetone or citrus-based removers.
02Clean the piece
  • Wash gently by dabbing, never rubbing.
  • Let it air-dry lying flat, hair side up.
  • Brush gently once it's dry. If you use a hairdryer, use the cool or lowest setting. Never use a hair straightener.
  • Store it flat, away from sun and heat.
03Look after your skin
  • Wash the area afterwards and use a fragrance-free moisturiser overnight.
  • Make sure the piece and your skin are oil-free before the next wear.
  • Remove before swimming, saunas or steam rooms.
04Check weekly
  • Check the edges for tears, lifting or hair loss.
  • See a dermatologist if irritation keeps coming back.
Wearing it every day? Read the daily-wear guide →
Expected lifespan
PartOccasional wearDaily wear
Tape flangeAbout 12 months2–4 months
Hair lay and density12+ monthsVisibly reduced after a few months
FAQ

Questions, answered.

Will anyone be able to tell?+

Every edge sits at least 10 mm inside your beard line, and the piece's hair overhangs the edge by 8 mm or more. At conversational distance, it reads as your beard on a stronger jaw.

Do I need my own beard?+

Yes. The three pieces sit inside your beard, so your own hair and the piece's hair hide the edges together. A groomed beard of about two weeks works best.

I don't have a beard. What should I use?+

Use the Beard System. It's made for a clean-shaven face and comes with the beard, moustache, and jaw and chin shaping as one set.

How much difference does it make?+

The chin comes in two projections: subtle adds 2–4 mm and standard adds 5–7 mm. Each adds 4–8 mm of width at each jaw angle.

Can I talk and eat normally?+

Yes. A soft gel core sits under a thin silicone skin, and the underside is hollow over the chin and the chewing muscle, so your face moves freely beneath it.

How long can I wear it?+

Up to 12 hours at a time. Take it off at night.

Can I wear it every day?+

Yes. It goes on in minutes, so daily wear is easy to fit into your morning. Daily wear does raise the load on your skin and on the piece.

  • Patch-test the tape and adhesive on your inner arm for 48 hours, then wear it 2–3 days a week for the first two weeks before building up.
  • Shift tape placement a few millimetres each day, wipe a skin barrier film (a liquid from the pharmacy that dries to a thin protective layer) where the tape goes, and take at least one rest day a week.
  • Keep two units and alternate them so each can dry fully between wears.
  • Expect the flange to last 2–4 months instead of about 12.
  • Remove it before swimming, saunas and hard workouts.

Stop and rest if redness, bumps or itching last more than a day. See a dermatologist if irritation keeps coming back.

How do I put it on?+

Trim a narrow strip along your jawline, clean and dry the skin, then press each piece on with the pre-cut tape. The firmer tape goes under the jaw, the gentle silicone tape on the upper edges.

How do I take it off and clean it?+

Loosen the tape with isopropyl alcohol or a silicone-based remover. Avoid acetone and citrus-based removers. Hand wash gently and let it air dry.

How do I find my size?+

Sizes are set by two measurements: the width across your jaw angles and the distance from your chin to your lower lip. The size quiz takes you through both. Then you choose a chin projection: subtle or standard. That choice comes down to the look you want and how recessed your chin is already.

How heavy is it?+

Under 20 grams for all three pieces.